GalaxyIP

dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB.

KaeilOS is an embedded linux GNU/GPL distribution composed of a collection of the best publicly available Open Source packages. Version 4.00 available since January 2009 has joined OpenEmbedded project offering a wider selection of packages and recipes.

This is a Sketch for the arduino IDE to enable the usage of a DHT22 sensor connected to a NodeMCU (ESP8266) with MQTT. Also supported are 2 status LED's and a SPI diaplay. After start the sensor device, there will be a Wifi-AP for configuration purposes. After successfully configuration, the sensor is connected as a Wifi-client and send the temperature and humidity data via MQTT within the given intervall. During AP-mode and client-mode, there are some RESTful functions (HTTP-requests) available, for configuration and retrieving information. MQTT data transport to brokerRESTful functions (HTTP-requests)Configuration via Wifi-AP

Modular system to emulate any digital system you care to imagine. Add modules for input and output devices, processors, microcontrollers, etc. Core system emulates shared bussesConnect devices to bussesWill support a multitude of devicesBuild discrete devices into a whole system